LS2710G/M
LS2710G/M is high tensile polyvinyl chloride films with high tack acrylic based, pressure sensitive adhesive and white opaque. This is designed to meet the marking/printing requirements and specifications of the transportation, vending machine, petroleum/petro-chemical, automotive and heavy equipment industries.
Areas of use
- Screen printing
- POP display, vending machine and automotive striping
- Farm and construction equipment markings
⇒ The films conform well to flat and seamed surfaces, when processed and applied according to LG Hausys's recommendations.
Advantage
- 2 years durable calendered film
- Good compatibility : screen print, electro static etc
- Dimensional stability and performance under a wide range of physical and climatic conditions
- Cost effective product
- Using Acrylic adhesive(Permanent)
- Liner : Super flat, double side olefin coated paper(90#)
- Standard Width: 30”, 54”, 60”
- Standard Length: 50yd, 100yd, 250yd
Characteristic
| Item | Description |
|---|---|
| Film | 3.2mils(80㎛)opaque film with gloss finish |
| Thickness | 4.2mils(105㎛) with adhesive(± 10 %) |
| Adhesive | Acrylic based pressure sensitive(Solvent based) |
| Adhesive color | Grey |
| Liner | Double side olefin coated paper |
| Application surfaces | Flat, rounding etc |
| Application temp. | ≥10℃(18 to 25℃ optimum) |
Durability
Durability is based on field experience and exposure tests in South Korea. Outdoor durability is 2 years when properly processed and applied (unprinted film vertical exposure).
Shelf Life
Shelf life is 1 year from factory shipment.
Storage condition: Free from excessive moisture, temperature, direct sunlight (20℃ x 50% R.H)
Physical Properties
| Property | Metric Units | Test Method |
|---|---|---|
| Thickness (Including adhesive) | 4.2mils(105㎛) ± 10% | Micrometer |
| Tensile strength | ≥ 1.8kg/cm² | ASTM D882 |
| Elongation | ≥ 100% | ASTM D882 |
| Peel adhesion(24hrs) | ≥1,200g/in | 180 peeling PSTC-1 |
| Service temp. range | -25℃ ~ 82℃ | Film applied Al panels 24hrs prior test |
| Application temp | ≥ 10℃ | 18 to 25℃ optimum, on clean substrate |
| Opacity | Tt<10 | Haze Meter (Tt: Transmission) |
| Gloss | ≥60 | @60, in Machine Direction |
| Release liner thickness/weight | 0.16mm/ 90# |
Fabrication
Printing
The film can be screen printed with sericol/ Meyercord ink and clears or the equivalent.
Processing
Processing is the same as with any conventional vinyl film. The printed or unprinted films may be die cut by conventional thermal and steel rule method.
Drying methods can vary, but solvent retention must be eliminated as soon as practical. Failure to do so may affect vinyl and adhesive properties.
